Hydraulic separator in the heating system
To stabilize the temperature in many experts recommend the use of hydraulic dividers. By design, they can be quite different. As a rule, models are made on four nozzles. At the top of the device is the air vent. The crane is installed mainly ball type.
The channels are of different diameters, and in this case much depends on the power of the boiler. It should also be borne in mind that there are models with and without wipers. In turn, the supports can be fixed or adjustable. There is an average quality separator on the market in the region of 6 thousand rubles.
Meibes hydraulic separator air vent has an automatic type. In this case the valve in the device is used ball. The channels in this case are exactly 3.3 cm in diameter. A magnetic plate above the air vent is installed. Rectifier works through the sleeve.The bottom plate in the device is installed in stainless steel. The maximum sleeve can withstand a pressure of 5 bar. At the bottom
parts of the design manufacturer provides adjustable type support. There is a presented separator for today about 6200 rubles.
The hydraulic separator "North" in our time is in great demand. Plates in this case are made of stainless steel. At the same time, metal corrosion is not terrible for them. It should also be noted that this separator is suitable for 4 kW boilers. Of the design features should pay attention to high-quality air vent. In this case, it is used mechanical type. You can switch it quite simply with the help of the lever. The crane is installed in a ball-type device, and it is located in the upper part.
Directly under the air vent there is a fairly strong plate that can withstand a maximum pressure of 6 bar. In this case, the diameter of the channel in the system is 4.5 cm. The plates in this case are of the magnetic type. Sleeves attached directly to them.Additionally, it is important to mention that the bottom of the device is protected by a ring. In the installation of this separator is quite simple. The diameter of the lower nozzle is 5.5 cm. In this case, the drain valve is installed with a fitting. In this case, the dirt collector is not provided by the manufacturer. It is worth the presented configuration of about 6100 rubles.
Properties of the model "Elterm SHE32"
This hydraulic separator boiler air vent has an automatic type. Thus, the circulation of water is quite high quality. This modification is suitable for boilers whose capacity does not exceed 4 kW. Additionally, it should be noted that for its convenient installation by the manufacturer, a nozzle is provided, the diameter of which is 4.5 m.
In this case, the dirt collector is located at the bottom. Directly sleeve installed over the drain valve. At the same time plates are made of stainless steel. The maximum pressure they can withstand 6 bar. The channel at the device has a diameter of 4.8 cm. There is only one rectifier for this separator. In this case, the ball valve is located in the upper part of the device. This separator is worth about 5800 rubles in the store.
Parameters of the device "Elterm SHE33"
The indicated capacitive hydraulic separator is considered quite good in terms of parameters. However, before buying it should be borne in mind that it has cast-iron plates. In this case, the dirt collector is not provided by the manufacturer. The pressure of the upper plates can withstand 4 bar. Thus, connecting a device to a 5 kW boiler is quite dangerous. In this case, the most optimal option is the 3 kW.
The ball valve of the presented model is located in the upper part. At the same time the air vent is installed automatic type. High water circulation rate is ensured by the rotation of the rectifier. In this case, separation plates are installed above the crane. At the same time the drain branch pipe is available with the union. This separator is currently worth about 6200 rubles.
Modification "Olepro OGS3"
This hydraulic separator in the heating system differs from other devices in that the central channel in this case has a diameter of as much as 5.6 cm. Additionally, it should be noted that the manufacturer has four branch pipes in the system.This modification is suitable for boilers whose capacity is 4 kW.
Plates are installed under the rectifier. Crane - ball type. Mud collector installed pretty high quality. The diameter of the drain valve is 4.5 cm. At the same time, the support for this separator is of adjustable type. The sleeves of the model are made of stainless steel. In this case, the air removal system works through the central channel. In this case, the plate rectifier does not apply. This hydraulic separator in the store costs about 6300 rubles.
Properties of the device "Olepro OGS6"
This hydraulic separator in the heating system is appreciated by many because of its compactness. In this case, the parameter of maximum pressure in this case is 3 bar. Thus, the device can be used with boilers whose capacity does not exceed 5 kW. To connect appliances to the heating system, there are four nozzles. The diameter of the drain pipe is 4.5 cm. It has an aluminum fitting, its tap wear is small.
It should also be noted that the air vent in the model is installed in the upper part. A ball valve for adjusting the flow is located next to it.Sleeves water temperature can withstand quite large. At the same time there is a protective layer on the central channel. Thus, the process of metal corrosion rarely occurs. The rectifier of this device is installed flat, the pressure withstands great. Plates in this situation are located above the dirt collector. The supports in this device are of a fixed type, and it is not possible to adjust their position. This hydraulic separator is worth about 6 thousand rubles.
Model "Olepro OGS8"
This hydraulic separator plate is equipped with a steel type. In this case, the rectifier is installed above the central channel. Such systems are suitable for boilers with a capacity of about 4 kW. Additionally, it should be noted that the drain valve in the presented instance is installed without a choke. Support in this case can be adjusted. Thus, in the installation of the specified separator is quite simple. He used liners only aluminum. On the market for this model, asking about 6 thousand rubles.
Parameters of the separator "Olepro OGS13"
This hydraulic separator, among other devices, has a volumetric central channel.In this case, the plates are set magnetic type. The temperature they can withstand quite large. When this sleeve is installed with a protective coating. If we talk about the parameters, the indicator of the limiting pressure varies around 4 bar.
The nozzles in this case are set with a diameter of 4.5 cm. The drain valve is of a ball type. The air vent in this device is located at the top. In this case, the sleeves are installed above the rectifier. Directly fitting for the crane by the manufacturer provided the steel type. This separator is worth today at around 6200 rubles.